24 / 7
|
|
Fast-speed tube benders T-Twin
High-speed machines T-Twin are aimed at those who need to bend many identical products with maximum productivity from relatively small (conventionally, up to 60 mm, in a special modification - up to 76 mm) tubes. The machine is also effective for bending single pieces.
The T-Twin machines make it possible to bend practically all known mass-produced products with excellent quality. For example, such machines are used by firms that produce custom-made high-quality stainless steel products with a diameter of up to 76 mm - special handrails, handles, bumper bars, etc.
The machine is very reliable - we have customers operating T-Twin 360 days a year * 24 hours.
This T-Twin is a very simple machine. It can be successfully applied by businesses of all sizes.
Tube bending machine T-Twin with indication, programmable automatic clamps for linear movement and tube rotation in space and nodes for bending thin-walled stainless steel |
![]() |
The normal operating mode of T-Twin is one to six tubes at a time.
T-Twin bends with equal ease (while providing a high-quality bend corresponding to mandrel bending - low ovality, no corrugation) both seamless round tubes and:
The normal operating mode of the machine is its use in two-shift or three-shift mode.
Main technical characteristics:
Parameter | Base | Modification 400X | Reinforced |
Largest diameter of bent tubes | 63 mm | 63 mm | 76 mm |
Smallest tube diameter | unlimited | ||
Largest bending radius | 300 mm | 400 mm | 300 mm |
Smallest bending radius | is not limited by the construction, it is determined by the bending technology; usually 1.5 of tube diameters | ||
Length of bent tubes for mandrel bending | 2500 mm can be increased upon request |
||
Length of bent tubes with mandrelless bending | unlimited | ||
Maximum bending angle | 180° + inflection | ||
Accuracy of bending angle | 0.1° | ||
Maximum torque on the bending tool shaft (N*m) | 11000 | 11000 | 16500 |
Independent shaft rotation | yes | ||
Rotation of the bending disc, movement of the mandrel, clamp, tube clamp | electro-hydraulic, electronically controlled | ||
Area for laying multiple tubes when bending | 180 mm | ||
Correspondingly, the number of billet tubes bent simultaneously | depending on tube diameter - up to 6 tubes | ||
Weight without replacement parts and oil | less than 1500 kg | ||
Power consumption Note: Depending on the modification of the machine, the power consumption may be higher (depending on the speed of the machine) |
less than 7.5 kW | less than 7.5 kW | less than 10 kW |
Oil station capacity | less than 50 L | ||
Type of oil for filling the oil station | conventional, readily and universally available hydraulic oils |
Due to continuous improvement of machines, some technical parameters may slightly differ from those given in the table.
It is normal practice to adapt the machine to the specific requirements of a particular production.
![]() |
![]() |
![]() |
+372 5853 8105 |
![]() |
m@bend.tube |
© All rights reserved, 1993 - 2024.
We are the developers and manufacturers of sophisticated machines and appliances.
Our main serial products are CNC tube bending machines.
We also develop custom-made equipment, including special purpose machines, automated presses, hydraulic systems, equipment remote control systems.
To understand us better, read the following:
The company today
Geography of our deliveries
A brief history of the company
A bit of funny history - see the flyer we handed out about a quarter of a century ago:
CNC in the tube bending machines
(FAQ)
Tube bending is a tricky business.
We have knowledge and experience in the production of the tube bending machines (30 years).
Therefore, we can offer you the technologies and equipment that are optimal for you.
Types of our machines
What can be bent
Models of our machines:
Power (general industrial) tube bending machines T-76, T-90, T-108, T-114
Heavy Tube Bending Machines T-133, T-159, T-219
High-speed tube benders T-Twin
For bending of coils - T-Snake
Special - for large radii and others
Tube bending modernization?.
If you have machines that you want to bring up to modern standards or simply repair, you can confidently turn to us.
Fully automatic systems that can operate autonomously 24 hours a day?.
They receive drawings and tubes (in coils or bundles). They output finished products with quality control of bending and geometry.
Tools for any tube bending machines?.
Consultations on bending, technology selection?
Contact us.
At any time and from any place you can ask us any questions by phone, messengers, and email.
How to contact us
If you would like to receive information about updates, please click on the following link:
Please keep me informed about news. bend.tube
If your computer is properly configured, a letter to our address will be prepared for you. Send it.